Agate Mortar and Pestle

Agate mortar and pestle is translucent chalcedony with hardness 6-7.
Handcrafted from the finest agate stone with shining, polished grinding surfaces.
The mortar is octagonal and the pestle is cylindrical.

Product Details

Product Introduction:

Agate mortar and pestle is translucent chalcedony with hardness 6-7.

Handcrafted from the finest agate stone with shining, polished grinding surfaces.

The mortar is octagonal and the pestle is cylindrical.

We have the agate mortar with the inner diameter range from 40mm to 320mm in stock for your choice, also can design the size according to your request.

Cautions:

1.	During use, be particularly careful not to grind too much material. Hardness cannot be contacted with Hydrofluric Acid.
2.	Grinding operation: Mortars should be placed on hard objects on the slide, and research Pestle should be kept vertical. Bulk solids can only be crushed, but cannot be grinded. Otherwise it will damage the Mortar, Pestle or spill the research material.
3.	Explosive materials can only be lightly crushed, not grinded by use of force.
4.	Abrasive substances corrosive to skin should be covered with a thick piece of Paper or plastic film, then in its central hole, insert a line of research after the grinding pestle, Mortar in full bloom solid.
5.	Material to be grinded shall not exceed the volume of 1/3.
6.	Mortar & Pestle cannot be heated for drying, not even into the electric oven.
7.	Mortar can be washed with water, Hydrochloric Acid causes Acid corrosion of Mortars.
8.	It is Difficult to wash Mortar attached to the material, in such a case, Add a small amount of salt, then wash with water.